Chapter 3 – MSI Z97 MPOWER Manual User Manual

Page 87

Advertising
background image

Chapter 3

3-22

BIOS Setup

3-23

BIOS Setup

Sets the voltage limit for CPU under-voltage protection. If set to "Auto", BIOS will

configure this setting automatically. Higher voltage provides less protection and may

damage the system.

▶CPU Over Current Protection [Auto]

Sets the current limit for CPU over-current protection. If set to "Auto", BIOS will

configure this setting automatically. Higher voltage provides less protection and may

damage the system.

▶CPU Switching Frequency [Auto]

Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple

range. Increasing the PWM working speed will cause higher temperature of

MOSFET. So please make sure a cooling solution is well-prepared for MOSFET

before you increase the value. If set to "Auto", BIOS will configure this setting

automatically.

▶CPU VRM Over Temperature Protection [Enabled]

Enables or disables the CPU VRM over-temperature protection.

[Enabled]

Sets the temperature limit on CPU VRM for over-temperature protec-

tion. The CPU frequency may be throttled when CPU VRM over the

specified temperature.

[Disabled]

Disables this function.

▶DRAM Phase Control [Auto]

Controls PWM phase proportionally to the DRAM loading. If set to "Auto", BIOS will

optimize the DRAM PWM phase automatically.

[Auto]

This setting will be configured automatically by BIOS.

[Disabled]

Disables the PWM power phase switching feature.

▶DRAM Switching Frequency [Auto]

Sets the PWM working speed to stabilize DRAM voltage and minimize ripple range.

If set to "Auto", BIOS will configure this setting automatically.

▶SVID Communication [Auto]*

Enables or disables SVID (Serial Voltage Identification) support.

[Auto]

This setting will be configured automatically by BIOS.

[Enabled]

PWM phase will be changed dynamically according to the CPU SVID

(Serial Voltage Identification).

[Disabled]

Disables SVID (Serial Voltage Identification) support.

▶VCCIN Voltage [Auto]

Sets the CPU input voltage. The CPU input voltage is the CPU power source that is

shared with components of the CPU.

Advertising
This manual is related to the following products: