MSI Z87 XPOWER - Manual (Page 112)

Appendix B
B-6 Intel RAID
Then the following screen appears to indicate that the creation is finished. 7.
Go to the Create Volume field and press <Enter>, the following screen appears for
you to confirm if you are sure to create the RAID volume. Press <Y> to continue.
6.
[ ] CREATE VOLUME MENU
[ ] HELP
Name :
Press ENTER to create the specified volume.
[ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :
Volume0
RAID1(Mirror)
Select Disks
N / A
XXX.X GB
N / A
Create Volume
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y / N) :
DISK / VOLUME INFORMATION [ ]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
RAID Volumes :
ID Name Level
Strip Size Status Bootable
0 Volume0 RAID1(Mirror) N / A XXX.XGB Normal Yes
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk(0)
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk(0)
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
MAIN MENU [ ] [ ] MAIN MENU