Security -16 save & exit -16, Chapter 3, Security – MSI Z97 GAMING 9 AC Manual User Manual

Page 80: Important, Save & exit

Advertising
background image

Chapter 3

3-16

BIOS Setup

3-17

BIOS Setup

3-16

BIOS Setup

3-17

BIOS Setup

Security

Administrator Password

Sets administrator password for system security. Enters the administrator password if

set; user has full rights to change the BIOS items.

User Password

Sets User Password for system security. Enters the user password if set; but user

might have limited rights to change the BIOS items.

Important

When selecting the Administrator / User Password items, a password box will appear

on the screen. Type the password then press <Enter>. The password typed now will

replace any previous set password from CMOS memory. You will be prompted to

confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new

password. A message will confirm the password is being disabled. Once the password

is disabled, you can enter the setup and OS without authorization.

Trusted Computing

Sets TPM (Trusted Platform Module) function.

TPM SUPPORT [Disabled]

Enables or disables the TPM function to build the endorsement key for accessing

the system.

Chassis Intrusion Configuration

Press <Enter> to enter the sub-menu.

Chassis Intrusion [Disabled]

This function will be available if the chassis equips a chassis intrusion switch.

Once the chassis is opened, the system will record and issue a warning message.

To clear the warning message, set the item to [Reset], then it will return to

[Enabled] later. [Options: Disabled, Enabled, Reset]

Save & Exit

Discard Changes and Exit

Exit BIOS setup without saving any change. This it is used to abandon all changes

and exit BIOS setup.

Save Changes and Reboot

This item is used to save all changes and reboot the system.

Save Changes

This item is used to save current changes.

Discard Changes

This item is used to discard current all changes and restore to the previous values.

Restore Defaults

This item is used to restore/ load all default values by the BIOS vendor.

Boot Override

The installed boot-able devices will appear on this menu, you can select one of them

be a boot device to start booting.

Advertising
This manual is related to the following products: