MSI Z97-GD65 GAMING Manual - Manual (Page 87)

Chapter 3
3-23 BIOS Setup
DRAM VRM Over Temperature Protection [Auto]
Sets the temperature limit on DRAM VRM for over-temperature protection.
The DRAM frequency may be throttled when DRAM VRM over the specified
temperature.If set to "Auto", BIOS will configure this settings.
DRAM Power Duty Control [Thermal Balance]
Selects the method of VRM control for DRAM phase.
[Thermal Balance] Control the VRM with thermal balance mode.
[Current Balance] Control the VRM with current balance mode.
PCH Vdroop Offset Control [Auto]
Sets a percentage of offset voltage for PCH vdroop. If set to "Auto", BIOS will
configure this setting automatically.
PCH Over Voltage Protection [Auto]
Sets the voltage limit for PCH over-voltage protection. If set to "Auto", BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
PCH Under Voltage Protection [Auto]
Sets the voltage limit for PCH under-voltage protection. If set to "Auto", BIOS will
configure this setting automatically. Higher voltage provides less protection and
may damage the system.
PCH Over Current Protection [Auto]
Sets the current limit for PCH over-current protection.
[Auto] This setting will be configured automatically by BIOS.
[Enhanced] Extends the limitation of CPU over-current protection.
PCH Switching Frequency [Auto]
Sets the PWM working speed to stabilize PCH voltage and minimize ripple range.
If set to "Auto", BIOS will configure this setting automatically.
PCH VRM Over Temperature Protection [Auto]
Sets the temperature limit on PCH VRM for over-temperature protection. The PCH
frequency may be throttled when PCH VRM over the specified temperature.If set to
"Auto", BIOS will configure this settings.
SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identification) support.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶