Chapter 3 – MSI Z87M GAMING User Manual
Page 84
Chapter 3
3-20
BIOS Setup
3-21
BIOS Setup
3-20
BIOS Setup
3-21
BIOS Setup
CPU VRM Over Temperature Shutdown [Enabled]
Sets the system whether be powered off or not when the CPU VRM temperature
over the limitation temperature of CPU VRM protection.
[Enabled]
The system will be off when over the specified temperature.
[Disabled]
Disables this function.
Digital Compensation Level [Auto]
Sets the current compensation level for CPU PWM when the MOS phases are
changed. If set to "Auto", BIOS will configure this setting automatically. Higher
compensation level provides more overclocking ability.
Imon Overwrite [Auto]
Sets the Imon current for CPU.
[Auto]
This setting will be configured automatically by BIOS.
[Quarter]
Sets the Imon current into quarter.
[Half]
Sets the Imon current into half.
[Disabled]
Sets the default values for Imon current.
Transient Boost [Disabled]
Enables or disables the transient boost.
[Enabled]
Enables this function may lead into a stable system under heavy
system loading.
[Disabled]
Disables this function.
SVID Communication [Auto]
Enables or disables SVID (Serial Voltage Identification) support.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled]
Disables SVID (Serial Voltage Identification) support.
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
Current VCCIN Voltage
Shows current CPU VCCIN voltage. Read-only.
CPU Core Voltage Mode/ CPU Ring Voltage Mode [Auto]
Selects the control modes for these voltages.
[Auto]
This setting will be configured automatically by BIOS.
[Adaptive Mode]
Sets adaptive voltages automatically for optimizing the system
performance.
[Override Mode]
Allows you to set these voltages manually.
CPU Core Voltage/ CPU Ring Voltage [Auto]
Sets these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
▶
▶
▶
▶
▶
▶
▶
▶
▶