Rear panel connections – Audiovox VE926 User Manual

Page 12

Advertising
background image

14) VOLUME UP (X) BUTTON – Press this button to raise the volume.

15) VOLUME DOWN (W) BUTTON – Press this button to lower the volume.

16) SEEK BUTTONS (TS-Right Side) – Press these buttons to go to next available channel with

sufficient signal strength.

17) CHANNEL BUTTONS (TS-Left Side) – Press these buttons to go to next available channel.

18) DISPLAY WINDOW – Displays the channel/station number, time, and selected source.

19) REMOTE INFRARED SENSORS – These sensors receive infrared command signals from the

hand held remote control unit.

20) MICROPHONE – Used for hands-free speakerphone operation.

21) SCREEN LOCK BUTTON – Used to lock screen in place.

22) Disc Insertion Slot

1) AC LINE CORD – Connects to AC outlet

2) AUDIO LINE OUT – Connect to low-level input of stereo system or low-level input of computer

speaker

REAR PANEL CONNECTIONS

7 8

3) SPEAKER OUT TERMINAL – Connect to external speakers (min. 8ohms)

4) FM ANTENNA – Allows the VE926 to be connected to a 75-Ohm external antenna for the

reception of FM broadcast signals.

5) AM ANTENNA - Allows the VE926 to be connected to an external antenna for the reception of

AM broadcast signals.

6) A/V (AUDIO/VIDEO) INPUT CONNECTORS – Connect to A/V OUTPUT of a VCR or

Camcorder.

7) TV ANTENNA (75 OHM ANTENNA CONNECTOR) -Allows the VE926 to be connected to a

75-ohm external coaxial antenna or cable TV system.

8) TEL JACK – Connect to telephone jack (not supplied) for hands-free speakerphone.

11

Advertising