MSI Z77A-G43 GAMING - Manual (Page 50)

2-6
BIOS Setup
Advanced
PCI Subsystem Settngs
Press <Enter> to enter the sub-menu.
PCIE GEN3
Ths tem s used to enable/ dsable the PCIe generaton 3 support.
PCI Latency Tmer
Controls how long each PCI devce can hold the bus before another takes over.
When set to hgher values, every PCI devce can conduct transactons for a longer
tme and thus mprove the effectve PCI bandwdth.
ACPI Settngs
Press <Enter> to enter the sub-menu.
ACPI Standby State
Specfies the power savng mode for ACPI functon
[S1] Sleep Mode. Hardware remans on.
[S3] Suspend to RAM. Turns off hardware. (Recommended)
Power LED
Configures how the system uses power LEDs on the case to ndcate sleep/
suspend state.
[Dual Color] The power LED changes ts color to ndcate the sleep/suspend
state.
[Blnkng] The power LED blnks to ndcate the sleep/suspend state.
Integrated Perpherals
Press <Enter> to enter the sub-menu.
Onboard LAN Controller
Ths tem allows you to enable/ dsable the onboard LAN controller.
LAN Opton ROM
Ths tem s used to decde whether to nvoke the Boot ROM of the onboard LAN.
Network Stack [Dsabled]
Set UEFI network stack for optmum IPv4/ IPv6 functon.
[Enabled] Enable UEFI network stack.
[Dsabled] Dsable UEFI network stack.
Ipv4 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack wll be defined as IPv4 protocol.
Ths tem wll appear when “Network Stack” s enabled.
[Enabled] Enable the Ipv4 PXE boot support.
[Dsabled] Dsable the Ipv4 PXE boot support.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶