Boot -12 security -12, Chapter 3, Boot – MSI A88X-G45 GAMING User Manual

Page 74: Security, Important

Advertising
background image

Chapter 3

3-12

BIOS Setup

Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]

Disables or enables the system wake up by PS/2 keyboard.

[Any Key]

Enables the system to be awakened from S3/ S4/ S5 state when

activity of any key on PS/2 keyboard is detected.

[Hot Key]

Enables the system to be awakened from S3/ S4/ S5 state when

activity of hot key on PS/2 keyboard is detected.

[Disabled]

Disables this function.

Boot

Sets the sequence of system boot devices.

Full Screen Logo Display [Enabled]

Enables or disables to show the full screen logo while system POST.

[Enabled]

The OS boots straight to the GUI without showing the POST screen.

[Disabled]

Shows the POST messages at booting.

Boot Mode Select [LEGACY+UEFI]

Sets the system boot mode from legacy or UEFI architecture depending on OS

installation requirement. This item will become unselectable and will be configured

automatically by BIOS when “Windows 8/ 8.1 Feature” is enabled.

[UEFI]

Enables UEFI BIOS boot mode support only.

[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot.

FIXED BOOT ORDER Priorities

Sets device priority for system boot.

Boot Option #1~N

These items are used to prioritize the installed boot devices.

Security

Administrator Password

Sets administrator password for system security. Enters the administrator password if

set; user has full rights to change the BIOS items.

User Password

Sets User Password for system security. Enters the user password if set; but user

might have limited rights to change the BIOS items.

Important

When selecting the Administrator / User Password items, a password box will appear

on the screen. Type the password then press <Enter>. The password typed now will

replace any previous set password from CMOS memory. You will be prompted to

confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new

password. A message will confirm the password is being disabled. Once the password

is disabled, you can enter the setup and OS without authorization.

Advertising
This manual is related to the following products: