MSI X99S SLI PLUS Manual - Manual (Page 75)

Chapter 3
3-12 BIOS Setup 3-13 BIOS Setup
▶Resume By Onboard LAN [Disabled]
Disables or enables the system wake up by Onboard LAN.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of LAN device is detected.
[Disabled] Disables this function.
▶Resume By USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity
of USB device is detected.
[Disabled] Disables this function.
▶Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Disables or enables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled] Disables this function.
▶Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
Boot
Sets the sequence of system boot devices.
▶Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled] The OS boots straight to the GUI without showing the POST screen.
[Disabled] Shows the POST messages at booting.
▶GO2BIOS [Disabled]
Enables or disables the system to power on and go to the BIOS setup directly by long
pressing the power button about 4 seconds when the system is off.
[Enabled] The system boots straight to the BIOS setup by long pressing the power
button about 2~4 seconds when the system is off.
[Disabled] Disables this function.
▶AUTO CLR_CMOS [Disabled]
Enables or disables auto-clear CMOS function.
[Enabled] When the booting process hang-up over 5 seconds and then the CMOS
data will be cleared automatically.
[Disabled] Disables this function.