MSI X79A-GD45 PLUS Manual - Manual (Page 60)

2-8
BIOS Setup
SYS Fan1/ 2/ 3/ 4 Control
These tems allow user to select how much percentage of speed for the SYSFAN1/
2/ 3/ 4.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2/ 3/ 4 Speed
These tems show the current status of all of the montored hardware devces/
components such as CPU temperature/ system temperature and all fans’ speeds.
Power Management Setup
Press <Enter> to enter the sub-menu.
EuP 2013
Energy Usng Products Lot 6 2013 (EUP) reduces power consumpton when system
s off or n standby mode.
Note: When enabled, the system wll not support RTC wake up event functons.
Restore after AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power Off] Always leaves the computer n the power off state.
[Power On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wndows 8 Configuraton
Press <Enter> to enter the sub-menu.
Wndows 8 Feature
When enabled, the system wll swtch to the UEFI mode to meet the Wndows 8 logo
requrement. Before enablng ths field, please make sure all nstalled devces &
utltes (hardware & software) meet the Wndows 8 system requrements.
MSI Fast Boot
Ths settng enables or dsables the MSI Fast Boot functon.
Fast Boot
When enabled, some tems wll be actvated and users can use these tems to set
the Wndows 8 fast boot events. “Fast Boot” wll only be avalable When "MSI Fast
Boot" s dsabled.
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng fields, and use the followng fields to set the
wake up events. Settng to [OS], the wake up events wll be defined by OS.
Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶