Chapter 3 – MSI Z97-G55 SLI Manual User Manual

Page 75

Advertising
background image

3-18

BOIS Setup

3-19

BIOS Setup

Chapter 3

3-18

BOIS Setup

3-19

BIOS Setup

Legacy Tweaking [Disabled]*

Enables or disabled to improve performance for legacy benchmarking application like

3DMark 01.

[Enabled]

Enables this function for improving 3DMark 01 performance.

[Disabled] Disables this function.

Ring Ratio [Auto]

Sets the ring ratio. The valid value range depends on the installed CPU.

Adjusted Ring Frequency

Shows the adjusted Ring frequency. Read-only.

Adjust GT Ratio [Auto]

Sets the integrated graphics ratio. The valid value range depends on the installed

CPU.

Adjusted GT Frequency

Shows the adjusted integrated graphics frequency. Read-only.
< CPU BCLK Setting > (for Z97)

CPU Base Clock (MHz) [Default] (for Z97)

Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please

note that overclocking behavior and stability is not guaranteed. This item appears

when the installed processor supports this function.

CPU Base Clock Apply Mode [Auto]* (for Z97)

Sets the applying mode for adjusted CPU base clock.

[Auto]

This setting will be configured automatically by BIOS.

[Next Boot] CPU will run the adjusted CPU base clock at next boot.

[Immediate] CPU runs the adjusted CPU base clock immediately.

[During Boot] CPU will run the adjusted CPU base clock during boot.
< DRAM Setting >

DRAM Reference Clock [Auto]*

Sets the DRAM reference clock. The valid value range depends on the installed CPU.

This item appears when a CPU that supports this adjustment is installed.

DRAM Frequency [Auto]

Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

Adjusted DRAM Frequency

Shows the adjusted DRAM frequency. Read-only.

DRAM Timing Mode [Auto]

Selects the memory timing mode.

[Auto]

DRAM timings will be determined based on SPD (Serial Presence

Detect) of installed memory modules.

[Link]

Allows user to configure the DRAM timing manually for all memory

channel.

[UnLink]

Allows user to configure the DRAM timing manually for respective

memory channel.

Advertising