MSI CSM-Q87M-E43 - Manual (Page 63)

3-8 BIOS Setup 3-9 BIOS Setup
Chapter 3
3-8 BIOS Setup 3-9 BIOS Setup
Hybrid Hard Disk Support [Disabled]
Enables or disables the Intel Rapid Start Technology to support hybrid hard disk
drive.
[Enabled] Enables hybrid hard disk support.
[Disabled] Disables hybrid hard disk support.
RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored.
The screen will be saved before the system enters sleep mode. Then the system
will restore the screen when wakened.
[Enabled] Enables this function.
[Disabled] Disables this function.
RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.
USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
USB Controller [Enabled]
Enables or disables the onboard USB controller.
XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.
EHCI Hand-off [Enabled]
Enables or disables EHCI hand-off support for the operating system without EHCI
hand-off feature.
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
to enter the sub-menu.
Serial (COM) Port 0/ 1 Configuration
Sets detailed configuration of serial(COM) port 0/ 1. Press <Enter> to enter the
sub-menu.
Serial (COM) Port 0/ 1 [Enabled]
Enables or disables serial (COM) port 0/ 1.
Serial (COM) Port 0/ 1 Settings [Auto]
Sets serial port 0/ 1. If set to "Auto", BIOS will optimize the IRQ automatically or
you can set it manually.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶