MSI 990FXA-GD80 - Manual (Page 26)

2-10
Hardware Setup MS-7640
Chapter 2
Hardware Setup MS-7640
Chapter 2
Back Panel
Mouse/Keyboard
The standard PS/2 ® mouse/keyboard DIN connector s for a PS/2 ® mouse/keyboard.
Clear CMOS Button
There s a CMOS RAM on board that has a power supply from external battery to keep
the system configuraton data. Wth the CMOS RAM, the system can automatcally
boot OS every tme t s turned on. If you want to clear the system configuraton, use
the button to clear data. Press the button to clear the data.
Important
Make sure that you power off the system before clearng CMOS data.
After pressng ths button to clear CMOS data n power off (G3) state, the system wll
boot automatcally.
Coaxal S/PDIF-Out
Ths SPDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dgtal
audo transmsson to external speakers through a coaxal cable.
Optcal S/PDIF-Out
Ths SPDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dgtal
audo transmsson to external speakers through an optcal fiber cable.
1394 Port
The IEEE1394 port on the back panel provdes connecton to IEEE1394 devces.
USB 2.0 Port
The USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard,
mouse, or other USB-compatble devces. Supports data transfer rate up to 480Mbt/s
(H-Speed).
▶
▶
•
•
▶
▶
▶
▶
Keyboard
Lne-In
Lne-Out
Mc
RS-Out
CS-Out
SS-Out
Mouse
Clear
CMOS
Button
USB 2.0 Port USB 3.0 Port
eSATA/ USB 2.0
Combo Port
Coaxal
S/PDIF-Out
Optcal
S/PDIF-Out
USB 2.0
Port
LAN
1394 Port