Chapter 3 – MSI A88X-G43 User Manual
Page 72
Chapter 3
3-16
BIOS Setup
CPU Core Control [Auto]
Change the number of CPU Core in the system. If set to "Auto", the CPU will operate
under the default number of cores. [Options: Auto, One core per processor(Core 0
Only), One core per processor(Core 2 Only), One Compute Unit(Core 0 & 1), One
Compute Unit(Core 2 & 3), One core per Compute Unit(Core 0 & 2)]
AMD Turbo Core Technology [Auto]
Base on AMD Turbo Core Technology, part of CPU core ratio may pop down for
providing more performance headroom for active CPU core, even AMD Cool’n’Quiet
Technology is Disabled.
[Auto]
Turbo Core Technology will linked to AMD Cool’n’Quiet Technology.
[Enabled]
Enables this function.
[Disabled]
Disables this function.
Adjust Turbo Core Ratio [Auto]
Specifies the Turbo Core frequency multiplier.
Adjusted Turbo Core Frequency
Shows the adjusted Turbo Core frequency. Read-only.
Adjust GPU Engine Frequency [Auto]
Adjust GPU Engine Frequency.
Adjusted GPU Engine Frequency
Shows the adjusted GPU Engine frequency. Read-only.
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
Intel Extreme Memory Profile (XMP) [Disabled]
XMP is the overclocking technology by memory module. This item will be available
when you install the memory modules that support XMP technology. When the XMP is
Enabled, the AMP will be forced to be disabled.
[Disabled]
Disables this function.
[Profile 1]
Uses profile1 over-clocking settings of installed XMP memory module.
[Profile 2]
Uses profile2 over-clocking settings of installed XMP memory module.
AMD Memory Profile (AMP) [Disabled]
AMP is the overclocking technology by memory module. This item will be available
when you install the memory modules that support AMP technology. When AMP is
Enabled, the XMP will be forced to be disabled.
[Disabled]
Disables this function.
[Profile 1]
Uses profile1 over-clocking settings of installed AMP memory module.
[Profile 2]
Uses profile2 over-clocking settings of installed AMP memory module.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶