MSI A88X-G41 PC Mate - Manual (Page 68)

Chapter 3
3-12 BIOS Setup
Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second
in these fields (using the <+> and <-> to select the date & time settings).
Resume By PCI or PCI-E Device [Disabled]
Disables or enables the system wake up by PCI or PCI express device.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCI/ PCIe device is detected.
[Disabled] Disables this function.
Resume By Onboard LAN [Disabled]
Disables or enables the system wake up by Onboard LAN.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of LAN device is detected.
[Disabled] Disables this function.
Resume From S3 by USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from S3 (Suspend to RAM)
sleep state when activity of USB device is detected.
[Disabled] Disables this function.
Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Disables or enables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled] Disables this function.
Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
Realtek PCIe GBE Family Controller
Shows driver information and configures ethernet controller parameter. Press <Enter>
to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶