MSI FM2-A55M-E33 - Manual (Page 31)

3
MS-772
iMportANt
if you do not have any EMi problem, leave the setting at [disabled] for optimal
system stability and performance. But if you are plagued by EMi, select the
value of Spread Spectrum for EMi reduction.
the greater the Spread Spectrum value is, the greater the EMi is reduced, and
the system will become less stable. For the most suitable Spread Spectrum
value, please consult your local EMi regulation.
remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
overclocking profiles
press <Enter> to enter the sub-menu.
overclocking profile / 2/ 3/ 4/ 5/ 6
press <Enter> to enter the sub-menu.
Set Name for overclocking profile / 2/ 3/ 4/ 5/ 6
Give a name by typing in this item.
Save overclocking profile / 2/ 3/ 4/ 5/ 6
Save the current overclocking settings to roM for selected profile.
Load/ Clear overclocking profile / 2/ 3/ 4/ 5/ 6
Load/ Clear the stored profile settings from roM.
oC profile Save to uSB
Save the current overclocking settings to uSB drive.
oC profile Load from uSB
Load the stored settings from uSB drive.
Cpu Specifications
press <Enter> to enter the sub-menu. this sub-menu highlights all the key fea-
tures of your Cpu. the information will vary by model and is read-only. you can
also access this information at any time by pressing [F4]. press <Enter> to enter
the sub-menu.
Cpu technology Support
press <Enter> to enter the sub-menu. the sub-menu shows the installed Cpu
technologies. read only.
MEMory-Z
press <Enter> to enter the sub-menu. this sub-menu highlights all the settings
and timings of your diMMs. this information will vary by model and is read-only.
you can also access this information at any time by pressing [F5]. press <Enter>
to enter the sub-menu.
diMM~2 Memory Spd
press <Enter> to enter the sub-menu. the sub-menu displays the informations
of installed memory.
*
*
*