MSI NF750-G55 - Manual (Page 96)

B-6
NVIDIA RAID
▍
MS-7578 NVIDIA RAID
▍
MS-7578
Completng the RAID BIOS Setup
After assgnng your RAID array dsks, press F7. The Clear dsk data / Clear MBR
prompt appears.
1.
Press Y to clear the dsk data / MBR. The Array Lst screen appears, where you can
revew the RAID arrays that you have set up.
2.
Use the arrow keys to select the array that you want to set up, then press Enter. The
Array Detal wndow appears.
3.
The Array Detal screen shows varous nformaton about the array that you se-
lected, such as Strpe Block, RAID Mode, Strpe Wdth, Dsk Model Name, and dsk
capacty.
Press Enter agan to go back to the prevous wndow and then press F10 to ext the
RAID setup. Now that the RAID setup has been configured from the RAID BIOS, the
next step s to configure and load NVRAID drvers under Wndows, as explaned n
“Installng the NVIDIA MedaSheld Software Under Wndows” on p.B-8.
4.
5.