MSI Z77A-GD80 - Manual (Page 58)

2-8
BIOS Setup
Intel(R) Rapd Start Technology
Ths feature can make your system fast start up from hbernaton. Ths tem allows
you to enable/ dsable Intel Rapd Start Technology.
Intel(R) Thunderbolt
Press <Enter> to enter the sub-menu.
Wake From Thunderbolt Devces
Settng to [Enabled] allows system to be awakened from the power savng modes
through any event on thunderbolt devce.
Thunderbolt PCIe Cache-lne Sze
Ths tem s used to set PCIe cache lne sze for thunderbolt port.
Note: the avalable settngs depend on the nstalled thunderbolt devce.
Securty Level
Ths tem s used to define the securty level of thunderbolt devce.
SMI/Notfy Support
Ths tem s used to enable/ dsable the system management nterrupton notce for
thunderbolt port.
Thunderbolt Wake Delay
Ths tem s used to set the wake delay tme of thunderbolt devce.
USB Configuraton
Press <Enter> to enter the sub-menu.
USB Controller
Ths tem allows you to enable/ dsable the ntegrated USB 2.0 controller.
Legacy USB Support
Enable or dsable support for USB keyboards, mce and floppy drves. You wll be
able to use these devces wth operatng systems that do not support USB.
Hardware Montor
Press <Enter> to enter the sub-menu.
CPU Smart Fan Target
Controls CPU fan speed automatcally dependng on the current temperature and
to keep t wth a specfic range. If the current CPU temperature reaches the target
value, the smart fan functon wll be actvated.
SYS Fan1/ Fan2 Control
These tems allow users to select how percentage of speed for the SYSFAN1.
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ SYS FAN2 Speed
These tems show the current status of all of the montored hardware devces/ com-
ponents such as CPU temperature/ system temperature and the few fans’ speeds.
Intel(R) Smart Connect Configuraton
Press <Enter> to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶