MSI Z68A-G45 (B3) Manual - Manual (Page 57)

3-21
MS-7750
Chapter 3
Important
When you select the Admnstrator Password / User Password tem, a password box wll
appear on the screen. Type the password, and press <Enter>. The password typed now
wll replace any prevously set password from CMOS memory. You wll be prompted to
confirm the password. Retype the password and press <Enter>. You may also press
<Esc> to abort the selecton and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the pass-
word. A message wll show up confirmng the password wll be dsabled. Once the
password s dsabled, the system wll boot and you can enter Setup/ OS wthout enter-
ng any password.
These two tems prevent an unauthorzed person from changng any part of your system
configuraton.
U-Key
Ths tem s used to enable/ dsable USB drve as a key.
Make U-Key at
When the “U-Key” as sets to [Enabled], ths tem s selectable. Ths tem allows you to
specfy the USB drve.
Chasss Intruson Configuraton
Press <Enter> to enter the sub-menu.
Chasss Intruson
Ths tem enables or dsables the feature of recordng the chasss ntruson status
and ssung a warnng message f the chasss s once opened. To clear the warnng
message, set the field to [Reset]. The settng of the field wll automatcally return to
[Enabled] later.
Boot
Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen. Set-
tngs are:
[Enabled] Shows a stll mage (logo) on the full screen at boot.
[Dsabled] Shows the POST messages at boot.
▶
▶
▶
▶
▶