MSI X58M - Manual (Page 54)

3-8
BIOS Setup
▍
MS-7593 BIOS Setup
▍
MS-7593
a
dvanced
bioS f
eatureS
Full Screen Logo Dsplay
Ths tem enables ths system to show the company logo on the boot-up screen. Set-
tngs are:
[Enabled] Shows a stll mage (logo) on the full screen at boot.
[Dsabled] Shows the POST messages at boot.
Quck Bootng
Settng the tem to [Enabled] allows the system to boot wthn 10 seconds snce t wll
skp some check tems.
Boot Up Num-Lock LED
Ths settng s to set the Num Lock status when the system s powered on. Settng to
[On] wll turn on the Num Lock key when the system s powered on. Settng to [Off] wll
allow users to use the arrow keys on the numerc keypad.
IOAPIC Functon
Ths field s used to enable or dsable the APIC (Advanced Programmable Interrupt
Controller). Due to complance wth PC2001 desgn gude, the system s able to run n
APIC mode. Enablng APIC mode wll expand avalable IRQ resources for the system.
MPS Table Verson
Ths field allows you to select whch MPS (Mult-Processor Specficaton) verson to be
used for the operatng system. You need to select the MPS verson supported by your
operatng system. To find out whch verson to use, consult the vendor of your operatng
system.
▶
▶
▶
▶
▶