Spdif-out connector: jsp1 (optional), Cd-in connector: jcd_in1, Irda infrared module header: jir1 (optional) – MSI RS480M User Manual
Page 37
Advertising
2-19
Hardware Setup
SPDIF-Out Connector: JSP1 (Optional)
This connector is used to connect SPDIF (Sony & Philips Digital Interconnect
Format) interface for digital audio transmission.
Connected to JSP1
SPDIF Bracket (Optional)
JSP1
VCC
SPDIF
GND
CD-In Connector: JCD_IN1
This connector is provided for CD-ROM audio.
JCD_IN1
GND
R
L
JIR1
1
IrDA Infrared Module Header: JIR1 (Optional)
The connector allows you to connect to IrDA Infrared module. You must con-
figure the setting through the BIOS setup to use the IR function.
Pin
Signal
1
VCC5
2
NC
3
IRRX
4
GND
5
IRTX
JIR1 Pin Definition
Advertising
This manual is related to the following products: