Advanced Technology International USA M200 - Manual (Page 15)

Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205.
Advanced Technologies, Inc.
3758 West Devon Avenue | Lincolnwood, IL 60712 | USA
Sales: +1-800-815-6908 | Service: +1-847-329-9875 | Fax: +1-847-410-0094
Email: [email protected] | Web: http://www.tekvend.com
AC2001 Bill Changer
Product Overview
Advanced Technologies offers a complete line of bill changers for bulk changing of
paper currency into coins. US bills can be changed into quarters or dollar coins. Box
integrity is assured with full body hinge and screw type lock.
Technical Specifications
• Dual hopper
• Bill acceptor takes $1, $2, $5, $10 and $20 bills
• Stacker capacity of 1000 bills
• 2 hoppers that can dispense either all quarters [2800 / hopper], all $1 coins
[2200 / hopper], or 1 hopper of each.
• Dimensions of 13.5" W X 26" H X 13" D
• Weight of 91 lb
Warranty
The AC bill changers are warrantied against manufacturing defects for a period of
two years from date of shipment, to be determined by the serial number on its main
board's microchip. Warranties for components of the AC bill changers, if different,
supercede this general warranty.
Specifically, the MDB changer is warrantied against manufacturing defects for a
period of three years from date of manufacture, to be determined from the first four
digits of its serial number (wwyy).
The bill validator is warrantied against manufacturing defects for a period of two
years from date of manufacture, to be determined from the first four digits of its
serial number (wwyy).
Note that the card reader is warrantied against manufacturing defects for a period of
one year from date of shipment, to be determined by the serial number on the card
reader itself.
Advanced Technologies (TekVend) agrees to repair or replace at its discretion any of
the above items within the warranty periods specified for them. Advanced
Technologies (TekVend) agrees to pay ground return shipping and insurance on all
warranty repair or replacements.
Advanced Technologies (TekVend) cannot be responsible for any damage that occurs
to product returned to it due to inadequate return shipment procedures. The shipper
is responsible for ensuring that return shipment packaging is adequate and that the
return shipment is adequately insured.
Advanced Technologies (TekVend) does not warranty its product for damage caused
by abusive use, vandalism, improper installation, and improper field repair.