MSI CSM-H61M-P32/W8 - Manual (Page 30)

30
Memory Fast Boot
this item allows you to enable/ disable the memory fast boot function.
Gt overClocking
this item allows you to enable/ disable the overclocking of integrated graphics.
Gt ratio
this setting controls the ratio of integrated graphics frequency to enable the inte-
grated graphics to run at different frequency combinations.
Adjusted Gt Frequency
it shows the adjusted integrated graphics frequency. read-only.
Spread Spectrum
this function reduces the eMi (electromagnetic interference) generated by modu-
lating clock generator pulses.
iMPortANt
if you do not have any eMi problem, leave the setting at [disabled] for optimal
system stability and performance. But if you are plagued by eMi, select the
value of Spread Spectrum for eMi reduction.
the greater the Spread Spectrum value is, the greater the eMi is reduced, and
the system will become less stable. For the most suitable Spread Spectrum
value, please consult your local eMi regulation.
remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
drAM Voltage
this item is used to adjust the memory voltage.
oC retry Count
When overclocking has failed, setting this item as [,3] will allow system to reboot
/ 3 times with the same overclocked configuration. if overclocking has failed ev-
ery time, the system will restore the defaults.
CPu Features
Press <enter> to enter the sub-menu. in this sub-menu you can adjust the CPu
features.
Active Processor Cores
this item allows you to select the number of active processor cores.
Limit CPuid Maximum
it is designed to limit the listed speed of the processor to older operating sys-
tems.
*
*
*