MSI Big Bang-XPower - Manual (Page 45)

Hardware Setup MS-7666
Chapter 2
2-29
Hardware Setup MS-7666
Chapter 2
Check the box
Important
If you want to remove one graphics card and quit the SLI function, make sure the “Mul-
tiGPU” function is disabled.
After the hardware installation is completed, restart the system and install the NV
SLI driver/utility. A configuration panel will be provided for Multi-GPU control. Check
the Enable multi-GPU box to enable the SLI function for the onboard graphics cards
(concerning the details of multi-GPU settings, please refer to your graphics card
manual).
2.
Restart your system and a pop-up message will show in the system tray confirming
the Multi-GPU has been enabled.
3.