MSI A75A-G55 Manual - Manual (Page 45)

BIOS Setup MS-7695
Chapter 3
3-9
BIOS Setup MS-7695
Chapter 3
CPU Smart Fan Target
The Smart Fan functon controls the CPU fan speed automatcally dependng on the
current temperature to keep t wth n a specfic range. You can enable a fan target
value here. If the current CPU fan temperature reaches to the target value, the smart
fan functon wll be actvated.
SYS Fan 1 Control
Ths tem allows user to select how percentage of speed for the SYSFAN1.
SYS FAN2 Smart Fan Target (for SYSFAN2)
The Smart Fan functon controls the fan speed automatcally dependng on the
current temperature to keep t wth n a specfic range. You can enable a fan target
value here. If the current fan temperature reaches to the target value, the smart fan
functon wll be actvated.
CPU/ System Temperature, CPU FAN/ SYS FAN 1~2 Speed
These tems show the current status of all of the montored hardware components
such as CPU/ system temperatures and all fans’ speeds.
Power Management Setup
Press <Enter> to enter the sub-menu.
EUP 2013
Ths tem s desgned for Energy Usng Products Lot 6 2013 (EuP) aka Energy
Related Products (ErP). To reduce Power Consumpton when system off or standby
mode.
Note: When “Enabled” EuP 2013 settng, system don’t support RTC wake up event
functon.
Restore after AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Power off] Always leaves the computer n the power off state.
[Power on] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶
▶