MSI 890FXA-GD70 - Manual (Page 66)

3-22
BIOS Setup MS-7640
Chapter 3
BIOS Setup MS-7640
Chapter 3
OC Dal Step
Ths tem s used to set value of each step when you rotate the OC dal knob.
OC Dal Reset
Select [Reset] f you need to reset the OC Dal Value.
OC Dal Value
Ths tem ndcates the overclockng value by OC dal functon. When you rotate the OC
dal knob, ths value wll change.
OC Dal Adjusted FSB Clock (MHz)
It shows the adjusted FSB clock by OC Dal functon (FSB Clock +OC Dal Value).
Read-only.
MEMORY-Z
Press <Enter> to enter the sub-menu.
DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformaton of
nstalled memory.
Advance DRAM Configuraton
Press <Enter> to enter the sub-menu and the followng screen appears.
DRAM Tmng Mode
Ths field has the capacty to automatcally detect all of the DRAM tmng.
1T/2T Memory Tmng
Ths tem controls the SDRAM command rate. Select [1T] makes SDRAM sgnal
controller to run at 1T (T=clock cycles) rate. Selectng [2T] makes SDRAM sgnal
controller run at 2T rate.
DCT Unganged Mode
Ths feature s used to Integrate two 64-bt DCTs nto a 128-bt nterface.
Bank Interleavng
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶