MSI K9AU Speedster-A4 User Manual
Page 40
Advertising
3-12
MS-96B3 Mainboard
[S3 (STR)]
The S3 sleep mode is a lower power state where the
information of system configuration and open appli-
cations/files is saved to main memory that remains
powered while most other hardware components turn
off to save energy. The information stored in memory
will be used to restore the system when a
“wake up”
event occurs.
[Auto]
Auto arrange.
USB Configuration
Legacy USB Support
Set to [Enabled] if your need to use any USB device in the operating system that
does not support or have any USB driver installed, such as DOS and SCO Unix.
Set to [Disabled] only if you want to use any USB device other than the USB
mouse.
USB 2.0 Controller Mode
Use this field to select the USB 2.0 mode.
PDF created with pdfFactory Pro trial versi
Advertising