MSI X2-109 v2 User Manual
Page 122
B-20
M S-9265 Server
2. Press Enter to go to the Adapter Properties screen, shown in Figure 5.1.
3. On the Adapter Properties screen, use the arrow keys to select RAID Proper-
ties
on the screen and press Enter.
4. When you are prompted to select a volume type, select Create IS Volume.
The Create New Array screen shows a list of disks that can be added to a
volume.
5. Move the cursor to the “RAID Disk” column. To add a disk to the volume, change
the “No” to “Yes” by pressing the + key, . key, or space bar. As disks are
added, the Array Size field changes to reflect the size of the new volume.
There are several limitations when creating an IS (RAID 0) volume:
–
All disks must be either SATA (with extended command set support) or SAS
(with SMART support).
–
Disks must have 512-byte blocks and must not have removable media.
–
There must be at least 2 and no more than 8 drives in a valid IS volume. Hot
spare drives are not allowed.
9265v1.0-B(LSI SAS RAID).p65
2008/5/15, 上午 11:44
20
PDF created with pdfFactory Pro trial versi