MSI MS-96D9 - Manual (Page 36)

2-12
Hardware Setup
▍
MS-96D9
Hardware Setup
▍
MS-96D9
Fan Power Connector: CPU_F1, SYSFAN1
The fan power connectors support system coolng fan wth +12V. When con-
nectng the wre to the connectors, always note that the red wre s the postve
and should be connected to the +12V; the black wre s Ground and should be
connected to GND. If the manboard has a System Hardware Montor chpset
onboard, you must use a specally desgned fan wth speed sensor to take ad-
vantage of the CPU fan control.
Important
Please refer to the recommended CPU fans at processor’s official website or
consult the vendors for proper CPU cooling fan.
PIN SIGNAL
1
2
3
4 GND
+12V
Sensor
Control
CompactFlash Socket: CF1
Ths socket s provded for CompactFlash (CF) cards.
PIN SIGNAL
1
2
3 GND
+12V
Sensor
1 3
CPU_F1
4
1
SYSFAN1