MSI Fuzzy 945GME2 V1.0 User Manual
Page 20
2-6
MS-9642 Mainboard
Installing DDRII Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
Volt
Notch
Important
You can barely see the golden finger if the memory module is properly inserted
in the DIMM slot.
Memory
The mainboard provides one 240-pin non-ECC DDRII 533/667 DIMM slot and supports
up to 2GB system memory.
For more information on compatible components, please visit .
tw/program/products/server/svr/pro_svr_qvl.php.
64x2=128 pin
56x2=112 pin
DDRII
240-pin, 1.8V
Single-Channel: All DIMMs in GREEN