MyWeigh 440Z - Manual (Page 2)

PLEASE READ COMPLETE INSTRUCTIONS BEFORE USE
Thank you for purchasing The Z. With normal care and proper treatment it will provide years of reliable
service. Please read all operating instructions carefully.
.KEEP THE FOLLOWING POINTS IN MIND:
* If the display becomes locked on Out2 please recalibrate the scale.
* Avoid lengthy exposure to extreme heat or cold, your scale works best when operated at normal room
temperature. Always allow the unit to acclimate to a normal room temperature for at least one hour
before use.
* Allow sufficient warm up time. Turn the scale On and wait several seconds to give the internal
components a chance to stabilize before weighing.
* The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to
other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.
* Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to
be quite durable, try to avoid rough treatment as this may permanently damage the internal sensor and
void your warranty.
* Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and MUST BE
HANDLED WITH EXTREME CARE.
*IMPORTANT ADVICE: Place the item to be weighed on the platform, after the stable weight is
displayed remove the item immediately. This will prolong the longevity and accuracy of this weighing
instrument..
.** These electronic scale are precision instruments. Do not operate near an in-use cell phone, cordless
phone, radio, computer or other electronic device. These devices emit RF and can cause unstable scale
readings. If your scale ever performs poorly, try moving the scale to a different room or location. This is
a very precise scale - the display may seem to wander or jump when weighing. This is due to air currents
or vibrations. Stable weighing is achieved when the display remains fixed for 3 seconds.
OPERATION_____________________________________________
Battery Replacement:
1) Three #357 button batteries are required.
2) To install batteries:
a) Turn the scale upside-down and open the battery compartment
b) Place batteries into battery compartment aligned correctly.