Nostalgia Electrics SCM502 - Manual (Page 8)

E
N
G
LI
S
H
6
HOW TO OPERATE
• Place the VINTAGE COLLECTION™ SNOW CONE MAKER on a stable,
waterproof surface near an electrical outlet before starting.
• Always make sure that the cord is away from any water source.
• Before plugging in the unit, add ice cubes to the Ice Shaving Canister by removing the Lid.
• Do not overfill the Ice Shaving Canister. Make sure that
there is enough room to put the Lid back on.
• Plug in the unit.
• Turn Lid counter-clockwise to lock and turn on unit.
• The unit will immediately begin shaving the ice.
• Repeat the process until you have shaved the amount of ice desired.
• Turn Lid clockwise and unplug unit from outlet when finished.
• Scoop out shaved ice with Ice Scoop from inside
Main Unit by opening the Door. Fill Plastic
Cones with desired amount of shaved ice.
• Squirt flavored syrup onto ice in cones and serve.
• This unit comes with two Plastic Cones. It does not
include syrup. It is recommended that you purchase a
snow cone kit with syrup mix and paper cones if you
are planning to make a large batch of snow cones.
By following these simple instructions, your VINTAGE COLLECTION™ SNOW
CONE MAKER will be fun for friends, family and kids of all ages!
Unit is ON Unit is OFF