Nostalgia Electrics SCC200 - Manual (Page 12)

ENGLISH
10
HELPFUL TIPS
Ice
For optimal ice shaving results, ice cubes should sit out of the freezer,
in a bowl, for about 10 minutes before putting them into the shaving
unit. If ice is frosty in appearance, it is too hard to shave. When
ice is clear and wet to the touch, then it is ready to shave.
CLEANING & MAINTENANCE
Make sure appliance is turned off and unplugged before cleaning. 1.
Open the housing door to clean and dry the inside of the unit 2.
using a slightly damp, non-abrasive cloth or sponge.
Wipe the outside of the unit using a slightly damp, non-abrasive 3.
cloth or sponge, then dry with a non-abrasive towel.
The shaving unit and clear lid are dishwasher safe. To take 4.
out the shaving unit, refer to steps on page 11.
Replacing the Blade
When your OLD FASHIONED SNOW CONE CART blade becomes
dull after a long period of normal use, replace it with the included
Replacement Blade and Tool. Should you need additional blades,
you can order them directly from the manufacturer.
The blade is VERY sharp. Use EXTREME CAUTION when handling.
Steps to replace the blade are on the next page.
Spinner Blade Cap Blade Housing Blade