Nostalgia Electrics RSM602 - Manual (Page 8)

E
N
G
LI
S
H
6
HOW TO OPERATE
• Place the RETRO SERIES SNOW CONE MAKER on a stable, waterproof
surface near an electrical outlet before starting.
• Always make sure that the cord is away from any water source.
• Before plugging in the unit, add ice cubes to the Ice Shaving Canister by removing the Lid.
• Do not overfill the Ice Shaving Canister. Make sure that
there is enough room to put the Lid back on.
• Plug in the unit.
• Turn Lid counter-clockwise to lock and turn on unit.
• The unit will immediately begin shaving the ice.
• Repeat the process until you have shaved
the amount of ice desired.
• Turn Lid clockwise and unplug unit
from outlet when finished.
• Scoop out shaved ice with Ice Scoop from inside
Main Unit by opening the Door. Fill Plastic
Cones with desired amount of shaved ice.
• Squirt flavored syrup onto ice in cones and serve.
• This unit comes with two Plastic Cones. It does not include syrup. It is
recommended that you purchase a snow cone kit with syrup mix and paper
cones if you are planning to make a large batch of snow cones.
By following these simple instructions, your RETRO SERIES SNOW CONE
MAKER will be fun for friends, family and kids of all ages!
Unit is ON Unit is OFF