Nostalgia Electrics HHP100 - Manual (Page 10)

ENGLISH
8
HELPFUL TIPS
POPCORN
The HOT AIR POPCORN MAKER is designed for all regular and
premium brands of popping corn. Yellow corn generally pops better than
white corn. Organic corn is not recommended for this machine.
SEASONING
NEVER put any seasonings or oil in the Popping Chamber. Always season
popcorn after it has been removed from the HOT AIR POPCORN MAKER.
CLEANING & MAINTENANCE
Make sure appliance is unplugged before cleaning. 1.
Allow unit to cool for at least 15 minutes. 2.
Remove the Top Housing from Base. 3.
Use slightly damp, non-abrasive sponge, towel or cloth to wipe 4.
down the inside and outside of Base, including inside of Popping
Chamber, then wipe with a non-abrasive towel to dry.
Wash inside and outside of Top Housing using a non-abrasive sponge, 5.
towel or cloth, then wipe with a non-abrasive towel to dry.
Wash Kernel Measuring Cup with hot, soapy water and dry. 6.
Reassemble unit and store. 7.
NOTE: Never place any parts in the dishwasher. Always wash by hand.
CHANGING THE BULB
To make the Marquee light up, you will need to add lightbulbs and batteries
(batteries not included). Use two 1.5v flashlight bulbs and two AA batteries.
Follow the steps below to change the lightbulbs:
While unit is turned off and has cooled completely, unscrew the four 1.
screws underneath the marquee using a Phillips head screwdriver.
Lift top of Top Housing to expose the bulbs. 2.
Unscrew lightbulbs and replace with two 1.5v flashlight bulbs. 3.
Replace top of Top Housing and replace screws. 4.