Nostalgia Electrics RKP530 CART - Manual (Page 10)

E
N
G
LI
S
H
8
5. Use one #4 Screw to attach a Support Bar (I) to one of the wheel assemblies.
Repeat process using the second wheel assembly and second Support Bar (I).
4. Connect one Wheel (E) and the Right Bar (N) with a #2 Bolt, a #5
Flat Washer, a #6 Flat Washer, a #7 Locking Washer, and a #10 Nut
Cap. Repeat process with second wheel and Left Bar (M).
6. Use the Back Cross Bar (O) to connect the wheel and support bar assemblies.