How to operate, En g li s h – Nostalgia Electrics DIC200 RETRO RED User Manual

Page 8

Advertising
background image

E

N

G

LI

S

H

6

HOW TO OPERATE

To prepare:

• Chill both Canisters for at least eight hours.

• Find a stable surface near an electrical outlet before starting. Make sure the cord is away

from any water source. It is acceptable to use an extension cord if needed.

• Choose your favorite recipe and prepare ice cream mixture per recipe instructions. Place

in refridgerator until ready to use.

1.

Take Canisters from freezer

and fit onto the Base.

2.

Place one Dasher in each canister.

3.

Fit Lid on top of the Base.

4.

Rotate locking mechanisms 90 degrees

to lock the Lid onto the Base.

5.

Insert the Spindles into the Electric

Motor and lock into place.

6.

Fit the Electric Motor onto the Lid and

press until a "click" is heard to indicate

that it has locked into place, then

press down both tabs on the side

of the Electric Motor to secure.

7.

Insert Flavor Funnels into slots

on the side of the Lid.

8.

Insert plug into nearest outlet and

press the "on" switch. IMPORTANT: Machine must be

switched on before adding ice cream mixture.

9.

Pour chilled ice cream mixture in through each Flavor

Funnel. Make sure that you do not fill Canister more than

²/

3

full, as mixture will expand during freezing process.

10. Turn off and unplug Electric Motor once ice

cream has churned for about 30 minutes. If the motor stops prematurely,

turn it off, break up any ice blockages, and start again.

11. Press in tabs on the side of the Electric Motor to lift off of the Lid.

12. Take the Dashers out and scrape off excess ice cream with a spatula.

13. Transfer ice cream to a freezer-safe container and freeze, or serve straight from the Canister.

Lid and Lid Cap are included for the option of storing the Canister in the freezer.

1

3

4

5

2

6

7

Advertising