Parts & assembly, En g li s h – Nostalgia Electrics RSM850 User Manual
Page 7
E
N
G
LI
S
H
5
PARTS & ASSEMBLY
Parts
After Taking the Unit Out of the Box
Wipe down the RETRO SERIES™ SLUSH & SOFT SERVE ICE CREAM MAKER
exterior with a clean, non-abrasive cloth or sponge. Thoroughly wash
Blending Chamber, Aluminum Cylinder, Cylinder Cage and Lid in warm,
sudsy water and thoroughly dry. DO NOT put the Base in water.
Assembly
1.
After drying, firmly attach Blending Chamber to Base by placing the
Blending Chamber on top of Base. If Blending Chamber is attached properly,
it will be aligned with Base so that the Spout is over the Drip Tray.
2.
Next, put Mixing Mechanism inside of Aluminum Cylinder and put Aluminum Cylinder
inside of Cylinder Cage. Then place Cylinder assembly inside of Blending Chamber.
1.
2.
Blending Chamber
Drip Tray
Base
Blending Chamber
Lid
Spout
Non-Stick Aluminum
Cylinder
Cylinder Cage
Mixing Mechanism