Nostalgia Electrics KEG9000 DTSS - Manual (Page 8)

E
N
G
LI
S
H
6
PARTS & ASSEMBLY
Read assembly instructions carefully before installing the KEGORATOR.
Once the unit is laid on its back, the coolant in the refrigeration unit is shifted. The coolant
in the refrigeration unit needs to stabilize before the power is turned on. Allow the
kegorator to stand in an upright position for about 8 hours before turning on the power.
CO2 Tank
Band
2.5lb CO2
Tank
Keg
Coupler (2)
Tap Tower
Washers (2)
Hose
Clamps (6)
Wrench tool
Double
Regulator
Railing
CO2 Hose (2)
Drip Tray
Casters (2 with Locking
Mechanism, 2 without)
Wire Rack
Tap tower
Handle (2)
Tap Tower Nut
Tap
tower
hose
Copper
Tube
Faucet (2)