Parts & assembly, En g li s h – Nostalgia Electrics HCC100NP User Manual
Page 7
E
N
G
LI
S
H
5
PARTS & ASSEMBLY
Parts
Installing the Battery (9-volt battery not included)
1.
Remove base from Lighted Chocolatier to access the 9-Volt Battery
Compartment located at the bottom of the unit.
2.
Align the polarities of the 9-volt battery with the power connector. The large (-)
terminal on the battery aligns with the small terminal on the power connector, and
the small (+) terminal on the battery aligns with the large terminal on the power
connector. (Power connector is located inside the 9-Volt Battery Compartment.)
3.
Firmly snap battery into power connector, and place connected battery into
9-volt Battery Compartment. Reconnect base of Lighted Chocolatier.
Lighted Chocolatier
(requires one 9-volt
battery, not included)
20 pieces of double-
sided decorative foil
Injector
Spatula/Knife
Chocolate molds included:
4-in-1 Candies
Eggs
Heart
Bear
Rabbit