Nostalgia Electrics BPC700 SERIES - Manual (Page 10)

E
N
G
LI
S
H
8
HELPFUL TIPS
• The cooler does not work.
It may not be properly connected to the power supply, or the voltage may be too low.
• The cooler does not work as efficiently as expected.
It may be caused by high outdoor temperatures, the thermostat setting
being too warm, or by frequently opening and closing the lid.
• It makes strange noises.
The noises may be caused by the cooler not being stabilized. Make
sure the surface that the cooler is on is flat and firm.
• The inside of the cooler develops mold during storage.
When the BEVERAGE PARTY COOLER is not in use, the inside must be COMPLETELY
DRY in order to avoid mold growth. Be sure to wipe the interior with a dry, non-
abrasive cloth before storing. It is also best to store the unit without the lid in place.
CLEANING & MAINTENANCE
To prolong the life of your BEVERAGE PARTY COOLER, please follow these simple instructions
for maintenance. This appliance should be maintained and cleaned after each use.
To avoid electric shock, always unplug the cooler before cleaning or moving.
1. Remove the contents inside the BEVERAGE PARTY COOLER.
2. Wipe the interior surfaces with a damp non-abrasive cloth or sponge. You may use
vinegar mixed with lukewarm water to prevent the growth of mold and fungus.
3. Wipe the outside of the cooler with a dry, non-abrasive cloth or towel.
4. Wash the lid in warm, soapy water with a non-abrasive cloth or sponge.
5. DO NOT use harsh chemicals, abrasive cleaners or scouring pads on
the BEVERAGE PARTY COOLER as they may damage the unit.
6. Thoroughly dry the interior, exterior and all parts after cleaning with a non-abrasive cloth.
7. Store the BEVERAGE PARTY COOLER in a clean, dry location when not in use.