Control panel, En g li s h – Nostalgia Electrics RMO770 SERIES User Manual

Page 11

Advertising
background image

E

N

G

LI

S

H

9

CONTROL PANEL

PROGRAM DIAL

The PROGRAM DIAL is a multi-functioning controller. It can be used to set the time

on the clock, adjust cooking time and to select a pre-defined cooking program.

Quick Start: Pressing the PROGRAM DIAL once will immediately

start a cooking cycle for one minute at maximum power.

Adjusting Time: You can adjust the cooking time by either pressing the PROGRAM DIAL

additional times to add 10-second increments, or turning the PROGRAM DIAL clockwise

to increase time by seconds and counter-clockwise to decrease time by seconds.

Selecting a Cooking Program: Turning the PROGRAM DIAL counter-clockwise prior to

starting a cooking cycle allows you to select a cooking program. The LED Display will light

up an icon to show which program is selected. If you do not understand what each icon

means, refer to the chart on the following page. Once you have selected your desired

program, press the PROGRAM DIAL. The LED Display will then prompt you to select the

weight or number of food items. Turn the PROGRAM DIAL again to select the weight

or number of food items and press the PROGRAM DIAL to begin the cooking cycle.

Note: If the microwave oven is in LOCK mode, the

PROGRAM DIAL will not work when pressed.

POWER

Press the MICRO POWER button to change the cooking power.

100 P: High Power; 100% microwave power. Applicable for quick and thorough

cooking. Use for cooking foods such as meats and vegetables.

80 P: Medium-High Power; 80% microwave power. Applicable for medium

express cooking. Use for cooking foods such as eggs, fish, rice and soup.

60 P : Medium Power; 60% microwave power. Applicable for steaming food.

40 P: Medium-Low Power; 40% microwave power. Applicable for defrosting food.

20 P: Low Power; 20% microwave power. Applicable for keeping food warm.

EXPRESS

Pressing the EXPRESS button once and then pressing the PROGRAM

DIAL will start a 30 second cooking cycle. You may add time in 30-second

increments up to 1.5 minutes by pressing the EXPRESS button again.

DEFROST

Press the PRESET/CLOCK/DEFROST button to select the cycle type. After

selecting the cycle, press INSTANT/START to confirm and then use the PROGRAM

DIAL to set the weight. Press INSTANT/START again to start cooking.

Display

Type

Weight Selection Options

d. 1

Defrosting meat

3.5 oz to 70 oz

d. 2

Defrosting poultry

7 oz to 98 oz

d. 3

Defrosting seafood

3.5 oz to 31.5 oz

NOTE: Halfway through defrosting, you will be

prompted by three beeps to turn the food over.

Advertising