Airlink101 APSUSB1 User Manual
Page 6
Advertising
For the Subnet Mask and Default Gateway fields, enter the same number as the TCP/IP setting of your
computer.
Step 6
In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches
your local area network.
For example: If your computer’s IP Address is
192.168.1
.100, enter the same three numbers:
192.168.1
in the corresponding fields.
Note:
You can leave the last IP Address number 254 as is unless another network device
(i.e. the Default Gateway) is already using that number. If another network device is already using 254,
then change it to another number that is currently not in use (preferably 200 - 253).
Step 7
Click OK.
Step 8
Close the PS Utility program.
Advertising