Prevue Pet 2154 - Manual

Assembly Instructions for Prevue Hendryx
 Econo KD Signature Series Model 2154
Congratulations! You have made a wise decision by purchasing this precision engineered bird
home that will provide you years of enjoyment.
Step 1: Insert all four
casters into bottom
posts on square base
frame.
Step 2: Remove
protective wrap &
Insert bottom pan
into front slot.
Insert grill
Prevue Pet Products, Inc. [email protected] 312-243-3624 / 800-243-3624
Step 3:
Place front
panel on top
of square
frame by
placing posts
into openings
Step 4:
Repeat
Step 3
using side
panel &
back panel
Step 5 : Repeat
Step 4 for side
panel. Insert
interior cup
brackets into
slots. Make sure
cup doors are
open while
installing
Step 6:
Bolt perch
into inside
of cage
using wing
nuts and
washers
Step 7: Insert play -top
into each of the panel
slots (see picture B) then
press firmly until flush
with cage body
Step 9: Insert
shorter screws
through ladder
into top of
frame and
secure with nut.
Slide top pan
into front slot
RV - 042003
Step 8: Insert
perch top
bracket onto
top of cage
using
(shorter)
screws.
Secure with
nuts & a
phillips head
screwdriver Step 10:
Place top cup holder onto bracket. Thread
(longer) screws through cup holder & ladder
on opposite side & secure with nuts
Final Step: Insert seedguards into slots on bottom
frame of cage. Secure by locking attached pin into
slot on adjoining seedguard. Place cups in holders