Audiovox DETACHABLE FRONT PANEL AM/FM/MPX RADIO WITH AUTO-REVERSE CASSETTE PLAYER - Manual (Page 6)

5
OPER OPER OPER OPER OPER A A A A AT TT TT ING INSTRUC ING INSTRUC ING INSTRUC ING INSTRUC ING INSTRUCT TT TT IONS IONS IONS IONS IONS
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
1
ON-OFF POWER BUTTON
Press this button to turn the unit on or off. 2
VOLUME/LEVEL CONTROL
To increase the volume level, press the side of the
control. The volume will increase and the level will be
shown on the display panel from a minimum of 0 to
a maximum of 15. To increase the volume quickly,
keep the button pressed. To decrease the volume
level, press the
side of the control. Keep the
button pressed to decrease the volume quickly. This
control is also used in conjunction with the Select
button
3
to adjust the bass, treble, balance and
fader levels as described in
4
,
5
,
6
, and
7
. 3
SELECT BUTTON (SEL)
This button is used to select the audio function (bass,
treble, balance, or fade) to be adjusted using the
Level control
2
. Pressing the Select button once will
set the unit for volume adjustment (“VOL” will appear
on the display panel). Pressing the button additional
times will select bass adjustment (“BAS” on display),
treble (“TRE”), balance (“BAL”), or fader (“FAd”).
The display will automatically return to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode
by pressing the Select button
3
so the “BAS”
indication appears on the display panel. Within 5
seconds of choosing the Bass mode, press the
or
side of the Level control
2
to adjust the bass
response as desired. The level will be shown on the
display panel from a minimum -10 to a maximum of
10 (0 indicates flat response). The display will
automatically return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode
by pressing the Select button 3
so the “TRE”
indication appears on the display panel. Within 5
seconds of choosing the Treble mode, press the
or
side of the Level control
2
to adjust the treble
response as desired. The level will be shown on the
display panel from a minimum of -10 to a maximum
of 10 (0 indicates flat response). The display will
automatically return to the normal indication 5 seconds
after the last adjustment or when another function is
activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
the Balance mode by pressing the Select button 3
so the “BAL” indication appears on the display panel.