Seiwa SW AP03 - Manual (Page 4)

QUICK START
• Install and check the system as described in Chapter 3.
• Press the STANDBY key to turn the system on.
• Follow the on-screen instructions to carry out the initial setup
• Press the STANDBY and PILOT keys together to turn off.
• Steer to the desired course and press PILOT.
• Use the course knob and/or arrow keys to change or trim the
course.
• To steer a course set by a GPS system, press NAV.
• Use the MODE key for access to alternate displays. Hold the
MODE key for 2 seconds to display the menu options.
• Hold the PILOT key down for two seconds to activate the DODGE
function. Use the arrow keys to dodge.
• Hold the PILOT key down for three seconds to activate the
autotack function.
3
3