Warranty, Disposal of this product and packaging, Accuracy of this manual – Seiwa Si-Tex MDA3 User Manual
Page 5
Page 2
Notices
The antenna should be mounted 3.5m above the deck in order to meet RF exposure requirements. Higher gain antennas will require a
greater MPE radius. Do not operate the unit when anyone is within the MPE radius of the antenna (unless they are shielded from the
antenna field by a grounded metallic barrier). The antenna should not be co-located or operated in conjunction with any other
transmitting antenna. The required antenna impedance is 50 ohms.
Warranty
This product is supplied with standard warranty as defined in the accompanying warranty information.
Disposal of this product and packaging
Please dispose of this AIS antenna splitter in accordance with the European WEEE Directive or with the applicable local regulations for
disposal of electrical equipment.
Every effort has been made to ensure the packaging for this product is recyclable. Please dispose of the packaging in an environmentally
friendly manner.
Accuracy of this manual
The AIS antenna splitter may be upgraded from time to time and future versions of the AIS antenna splitter may therefore not
correspond exactly with this manual. The manufacturer of this product disclaims any liability for consequences arising from omissions or
inaccuracies in this manual and any other documentation provided with this product.
Any attempt to tamper with or damage the product will invalidate the warranty.
!