Installing the macintosh driver – Adaptec DuoConnect Adapter AUA-3121 User Manual
Page 36
27
Installing the Macintosh Driver
Installing the Macintosh
Driver
In this procedure, you install the DisableSleep driver, which
prepares your Macintosh computer to use the DuoConnect card.
Note:
Blue and white G3s are not supported.
1
Turn on or restart the computer and insert the DuoConnect CD.
2
Double-click the Start Installation Here file on the CD.
3
Follow the instructions to install the latest Macintosh USB
drivers, if necessary.
4
Double-click the DuoConnect Installer file and follow the
instructions.
5
After the installation is complete, click Restart, if necessary, to
make the new settings take effect.
6
Verify that the card is seen by your computer by clicking Apple
System Profiler
in the Apple Menu. Then, click the Devices
and Volumes
tab.
Note:
The Apple System Profiler (version 2.5.8 or earlier)
identifies the DuoConnect adapter incorrectly. If you have
one of these earlier versions, download a new version from
Apple's software update page.