Auto-configuring a raid array – Asus P5GD2 User Manual
Page 128
5 - 2 4
5 - 2 4
5 - 2 4
5 - 2 4
5 - 2 4
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
RAID Mode................................ Stripe
Un-used Drive(s)......................... 4
Drive(s) in Array........................ 0
Array Capacity (size in MB).............. 8056
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ Auto Configuration Menu ]
[ Array Configuration ]
Setup Array Type as:
RAID 0
[
→
,
←
,Space] Change Option
[CTRL-Y] Save
[ESC] Exit
3.
At the bottom of the screen are the navigation keys. These keys allow
you to move through and select from the menu options.
Auto-configuring a RAID array
Auto-configuring a RAID array
Auto-configuring a RAID array
Auto-configuring a RAID array
Auto-configuring a RAID array
This option allows you to select a supported RAID set for the utility to
automatically configure.
To auto-configure a RAID set:
1.
From the IT8212 Setup Utility screen, press <1>. The following screen
appears.
2.
Use the left or right arrow keys or the space bar to select a RAID set.
As you select an option, the screen displays the array configuration of
the RAID based on the number of IDE devices installed.
3.
Press <Ctrl+Y> to save your RAID set.
4.
Press <Esc> to exit.
4.
Press the number of your selection or <Esc> to exit.
[1]..[5] Select
[ESC] Exit