TRITTON 720+ 7.1 Surround Headset - Manual (Page 13)

[13]
Connect to PS3
Remove protective caps from the optical cable .
Plug one end of the optical cable into the rear of the gaming console .
Plug the other end of the optical cable into the Decoder Box .
Plug one end of the USB Cable into a USB port on the console .
Plug the other end of the USB Cable into the Decoder Box .
Plug the headset connector into the Decoder Box .
Plug the headset into the in-line controller .
Power ON the gaming console and the Decoder Box .
On the PS3 go to Settings > Sound Settings and change the audio output to be
“Optical Digital” .
Watch to ensure that the “Dolby Digital” light on the Decoder Box illuminates as
a game or movie starts .
9 In the XrossMediaBar™ menu, select System Settings > Accessory Settings
> Audio Device Settings, and set both the input and output to “TRITTON 720+
Headset .” You can see a visual confirmation that the microphone is functioning
if the bar graph moves . If you do not see any movement, ensure the mute switch
is configured correctly and that all connections, including the microphone, are
tight and fully inserted .
If you are using a DTS-compatible game or movie, and the “Dolby Digital” light
on the decoder box does not illuminate, you must disable DTS 5.1 audio on your
PlayStation 3. To do so, navigate to Settings > Sound Settings > Audio Output
Settings > Optical Digital in the XrossMediaBar and ensure that “Dolby Digital 5.1
Ch.” is checked, and “DTS 5.1 Ch.” is unchecked.